The myBUTTERFLY is a portable device used to provide real-time measurements of NO2 pollutant concentrations in the air. The measured pollutant concentrations and location of the measurement are wirelessly sent by the device via Bluetooth or GSM, according to device configuration. The data is collected for post-processing analysis and further informative use in the Cloud.
The device is using sensors from SpecSensors 3SP-NO2-5F. The sensitive electronics is shielded from external interference. The device has been designed as an affordable mobile platform serving a singular purpose of local real-time NO2 pollutant monitoring. The device can be integrated into a wider measuring network via wireless connection with a mobile phone (both Android and iOS devices are supported) or as a fully independent unit.
FEATURES
• Low power consumption and long operating time
• Fast startup time as sensors are powered at all
times
• Possible use with a mobile phone via Bluetooth
• Possible use as an independent unit with its own
GSM communication interface
• GPS tracking
• Accelerometer
• Temperature sensor
• Humidity sensor
• Possibility of use with NO2, SO2 and O3 sensors
• Connectivity and configuration via USB
• Firmware update via USB
INTERFACES
- Procesor: family SMT32 F1, frequency 72 MHz
- Communication bus: USB 2.1
- Programming, updating: JTAG / SWD
- Connectors: power via USB Mini
- Power: input voltage 4,5 V ÷ 5,0 V USB
PHYSICAL
- Dimensions of the box (L x W x D): 95 x 60 x 25 mm
- Operating temperature: -10 °C ÷ 50 °C
- Relative humidity < 95% without condensation
- Weight: cca 105 g
ACCESSORIES
- SIM Card
- USB Mini charging cable
FEATURES
- Low power consumption and long operating time
- Fast startup time as sensors are powered at all times
- Possible use with a mobile phone via Bluetooth
- Possible use as an independent unit with its own GSM communication interface
- GPS tracking
- Accelerometer
- Temperature sensor
- Humidity sensor
- Possibility of use with NO2, SO2 and O3 sensors
- Connectivity and configuration via USB
- Firmware update via USB